Tincture Filling Production Line
Tincture Filling Production Line Introduction:
The tincture filling production line is suitable for the filling of small doses of tincture, liniment, sugar, safflower oil in pharmaceutical factories. The tincture filling machine can complete the processes of bottle unscramble, bottle transfer, quantitative filling, cap unscramble, cap feeding and cap rolling. All parts in contact with the medicine are made of 316L stainless steel or PTFE, with functions such as no bottle no filling, frequency conversion and speed regulation.
Tincture Filling Line Details:
|1、ST-QX-8 Tincture Roller Bottle Washing Machine
The tincture roller bottle washing machine is suitable for cleaning the inside and outside of the 30-500ml round bottles of various materials and the shoulder holder shaped bottles. Using two different gas (tap, ionized water, oil-free compressed air) sequential flushing, so that the bottle meets the production process requirements. And preliminarily blow dry the bottle.
|2、ST-SDHX-3500 Tincture Tunnel Hot Air Circulation Sterilization Oven
The tincture tunnel-type hot-air circulation sterilization oven is an integral tunnel-type structure, divided into three parts: a preheating zone, a high-temperature sterilization zone, and a cooling zone. It uses the principle of hot air laminar flow disinfection to sterilize the container for a short time. It is suitable for drying and sterilizing ampoules, antibiotic bottles, oral liquid bottles, and also for drying and sterilizing other medicinal glass bottles.
The machine adopts the advanced PLCAtf1 interface control system, controlled by the man-machine interface, in addition to monitoring the working conditions of the machine and ensuring the requirements of the production process, it can also implement joint control of the working conditions with the cleaning equipment and potting equipment to display the cause, location and Simple elimination methods, etc. And it can also automatically record temperature and graphs.
|3、ST-LP Tincture Automatic Bottle Unscrambler
The tncture automatic bottle unscrambler is suitable for automatic unscrambled plastic bottles in the pharmaceutical industry. This model has a reasonable structure. Suitable for round bottles of 5ml to 200ml; the exterior of the unscrambler is made of 304 stainless steel; the whole machine meets GMP requirements. The machine has stable transmission and no air source pollution. When working, the noise is low, the loss is low, the work is stable, and the output is stable. This machine has the functions of a bottle unscrambler with more bottles, a bottle unscrambler with more bottles, an unscrambler with fewer bottles, and a bottle picker with fewer bottles. Can be interconnected with supporting equipment.
|4、Tincture Filling Machine
The tincture filling machine is a special equipment for the pharmaceutical and health food industries. The automatic tincture filling machine has stable quality and easy operation. It adopts a PLC control system integrating machine, electricity and gas, which is safe and reliable in operation, low in failure rate, and extremely low in operation and maintenance costs.
|5、ST-TJGZ-4 Tincture Filling and Capping Machine
The tincture filling, plugging and capping machine is suitable for filling various types of bottles, such as 30-500ml glass bottles or plastic bottles, with inner stopper, outer cover and sealing.
It adopts linear filling, mechanical stoppering, upper outer cover, rolling (spinning) cover. The machine is simple to operate, small in area, and easy to maintain. And the production equipment before and after can form a production line.
|6、ST-TB-80 Tincture Vertical Self-adhesive Labeling Machine
The tincture labeling machine is suitable for labeling round bottles and round objects in various industries. It adopts step or servo motor control and imported touch screen. Accurate labeling, small error and high efficiency. Equipped with fault and numerical alarm device (optional), connected to the printer can output shift production records, and can automatically monitor the production status.
Tincture Filling Production Line Parameter:
|Number of Filling Heads||16|
|Number of Capping Heads||Single Pole 20 Heads|
|Pass Rate of Capping||≥99|