Maintenance and Maintenance of Honey Filling Machine

Maintenance and Maintenance of Honey Filling Machine:

The honey filling machine researched and produced by Sunter Machinery needs to increase its service life under correct maintenance operations. Therefore, the usual Wenhu is indispensable. Only by taking good care of it can it serve us well. Honey filling opportunities are differentiated according to their functions, but the basic maintenance is similar.

Maintenance and Maintenance of Honey Filling Machine

We can start from the following points:

1. Check the moisture filter and lubricator of the pneumatic combination two-parts every day before starting the machine. If there is too much water, it should be removed in time. If the oil level is not enough, lubrication should be added in time. Generally, lubrication should be added once every six months. Oil, the specific operation depends on the situation.
2. Check whether the grounding wire of the honey filling equipment is firmly in contact, whether the pneumatic pipeline is leaking, whether the air pressure is stable, and whether the motor chain is suitable.
3. Frequently observe the mechanical parts to see if they operate normally, whether there is any abnormality in lifting and rotation, and check the machine screws frequently. Generally, tighten the screws every week.

Maintenance and Maintenance of Honey Filling Machine
4. The motor needs to change the lubricant regularly.
5. After daily shutdown, clean up the residual materials in time, do a good job of cleaning and sanitation, keep the surface of the machine clean, and keep the electric control cabinet clean. When cleaning, the motor and circuit parts should be kept dry and wipe clean with a rag.
6. The sensor is a high-precision, high-sealing, and high-sensitivity device. It is strictly prohibited from impact and overload, and no contact during work, and no disassembly unless required for maintenance.

7. It is strictly forbidden to move or collide when the filling machine is running, and be careful not to collide with the original machine when moving.
8. Empty the material in the pipeline when it is not used for a long time. When it is not used for a long time, it is better to clean the outside and inside of the machine and dry it before packing and storing.
From the maintenance and maintenance of the honey filling machine, it is not difficult to see that this equipment can greatly improve the production guarantee of the product, and can effectively guarantee the quality and safety of the product packaging machine, effectively promote the guarantee ability of the product, and provide consumers Provide more material enjoyment, the future will play a greater role.